Bose Wave Radio manual Remote control, Insert the battery, matching the + symbols

Page 7

Setting Up

The remote control

Install the battery

The battery compartment on the remote control of your Wave® radio has a security lock. It must be unlocked before you open the compartment to insert or remove the battery.

1.Place the remote control face down on a flat surface.

2.Insert the tip of a ball point pen in the left side of the security lock. Push to the right and hold (Figure 4).

3.Slide the battery compartment open. Insert the battery into the battery carrier, matchng the + symbols.

4.Slide the battery compartment closed. It will automatically lock in place.

Note:

Use only a lithium Toshiba CR2025 or Maxell CR2025 battery. It may be available from a retail dealer or electronics store.

If you have difficulty finding a replacement battery, contact Bose® Corporation directly (see “Customer service” on page 13).

2

1

How to operate

Aim the remote control at your Wave® radio. The remote normally works up to 20 feet in front of the radio, and 6 feet to either side. Use the remote keys in the same way you use the radio control panel. Replace the remote control battery when it stops operating, or its range seems reduced (normally every year or two).

Figure 4

Push the security lock to the right with the tip of a ball point pen.

Figure 5

Insert the battery, matching the + symbols.

WARNING:

The remote control battery may cause a fire or chemical burn if mishandled. Keep it away from children. Do not recharge, disassemble, heat above 100˚C (212˚F), or incinerate. Dispose of used battery promptly. Replace with a battery of the type and model mentioned in the note above. Using another battery may cause a fire or explosion.

AM149204_02_V.pdf

January 7, 2002

7

Image 7
Contents Bose Wave Radio Avis Please read this owner’s guideFor your safety Where to find Unpack the carton see Figure Install the batteriesPlug the antennas and power cord into their jacks Connect the power cord and antennasClip Insert the battery, matching the + symbols Remote controlHow to read the radio display How to read the clock displayHow to customize the display Radio functions Clock functions Release when set Press TIME. The Alarm indicator will flashPress Time to return display to current time Press once. The indicators remain lit, Time, not alarm timeWhen the alarm goes off the radio volume will Set the alarm to go off. When alarm soundsSelecting the component Using other componentsLimited warranty Customer serviceMaintaining the Wave radio Warranty FeaturesProduct Information Size