BT Twin Radio manual Your BT Freeway Pro Twin radios are ready for use

Page 6

6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 6

BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196

6Getting started

WARNING – If using alkaline batteries

Alkaline batteries need replacing and CANNOT be charged using the charging unit.

Charging

Your BT Freeway Pro radios can be charged when they are switched on or off. However, it is recommended that you switch your radios off whilst charging as the charging time will be quicker.

The lights on the charging unit will stay lit even when the battery pack is fully charged.

Battery low indicator

When the battery power becomes

low the icon will be displayed to indicate that the battery needs recharging (or the 3 AA alkaline batteries need replacing). When you press PTT you will also hear the battery low alert tone.

The operation of your radio will become unreliable when the batteries are low.

If the charge level becomes too low, your radio will automatically switch off to avoid damage to the rechargeable battery pack.

For optimal battery life either remove the handsets from the charger once they are charged or switch off the charger.

Charge the batteries

Locate the dual charging unit on a flat surface, within reach of a mains power socket:

1.Plug the dual charger lead into the back of the charging unit and the plug into the mains power socket and switch on.

2.Slide each radio into one of the charging pockets, facing forward, to begin charging.

BT Freeway Pro

Mo

de

To fully charge the batteries from a fully discharged state takes around 14 to 16 hours.

Your BT Freeway Pro Twin radios are ready for use.

Image 6
Contents User Guide Welcome… Dual charging unit This guide Install the batteries Getting startedYour BT Freeway Pro Twin radios are ready for use Attaching the belt clip optional Getting to know your radio Radio controlsDisplay With the radio switched on Using your mobile radiosSwitching the radio power on Talking and listeningUse To select a channel from 1 to Switching key lock on Switching key lock offPress and hold PTT Is receiving. When the other radio user has finished Release PTT when you have finished speakingMode when PTT is not pressed and you are not changing Speak back to youTo send a call tone To change the call tonePress , the icon is displayed To switch the tone off When the channel you want to remove is being scannedTo switch the tone on Roger toneVOX using the handset Using a Freeway headset With VOX activeAdjust volume as required Sensitivity level using your Freeway headsetMessage back from the receiving radio Using your mobile radios Help Help Safety and general General informationEnvironmental Mobile radio channel frequency chart Channel number Technical informationGuarantee BT Accessories and replacement items BT products please call 0870 240Declaration of Conformity Offices worldwide