Pump Module Assembly
Models 247706 and 247707 only
For divider
D
G
H
Pressure Relief
Kit 247902
P
Hydraulic Control
Module
ti11453
FIG. 1 Model 247706 shown
Pump Module Assembly
1.Install Pump (D) on Reservoir (P).
2.Remove Vent Valve Hydraulic Control (J) fitting and replace with Plug (R) (FIG. 6, page 9).
3.Install Hydraulic Control Module on Reservoir (P).
4.Connect Tank Line (G) to Pump (D).
5.Connect Pump High Pressure Hydraulic Line (H) to Pump (D).
6.Install Pressure Relief Kit (247902) to Pump Outlet.
7.Install model number label as shown in FIG. 2.
Install
Identification
Label Here
FIG. 2
312349G | 5 |