Installing the Batteries

1)Position the radio face down on a soft surface to protect it.

2)Remove the battery compartment cover.

3)Insert the (4) “D” cell batteries into the compartment as indicated in the drawing below. Be sure the negative (-) end is against the spring. Refer to the drawing below to insure correct installation of your batteries.

4)Replace the battery cover. You are now ready to operate your radio.

Remove battery cover by pressing both clips at the same time towards the bottom of the radio.

AC power cord plugs in here.

First Battery

Third Battery

Second Battery

Fourth Battery

BATTERY REPLACEMENT

The battery indicator will display the battery level for approximately seven seconds after the radio is switched off. After removing dead bat- teries for replacement, you have approximately three minutes to replace the batteries before your clock and memory information will be lost (if the radio is not plugged in).

This symbol means	This symbol means	This flashing symbol means
the batteries are full.	batteries are dead.	the batteries need replacing.

		Page 9