C. Crane Radio instruction manual Display button works in two ways

Features and Operation Explained

station. There is a log in the back of this manual on pages 28-31 to help you organize your stations. Your memories will not be lost when batteries go dead or if you reset the radio.

T DISPLAY button

The DISPLAY button works in two ways:

1.When the radio is “on” the LCD display normally shows the frequency. Pressing the “DISPLAY” button will toggle the dis- play through “ALARM TIME”, “TIME” of day, and “SLEEP” timer status. It will show the minutes left on the “SLEEP” timer or “on” if the sleep timer is not being used.

2.When the radio is “off” the LCD display normally shows the time of day. Pressing the “DISPLAY” button will toggle the dis- play through “ALARM TIME”, tuning steps for AM, and your choice of 12 or

24 hour clock format. While the radio is “off ”, you can change from 12 hour to 24 hour clock format by holding the “DIS-

PLAY” button for five seconds. Change it back using the same method. See { “BAND” button on page 17 to change tuning steps for AM.

CCRadio-SWP Page 15