Quick Start
1.Slide K (pg. 10) “SENSITIVITY” switch to “DX” position.
2.Install two AA batteries in the g battery compartment, paying close attention to orientation of the batteries’ + and – ends.
3.Turn on the radio by pressing the Q POWER button.
4.Adjust I “VOLUME”
5.Select band by pressing the { BAND button
6.Use the W “TUNING” knob to locate a station or by directly entering a frequency:
a)First, select the { BAND you want
b)press the } “FREQ” UENCY” button
c)Enter the frequency on the q keyboard.
Page 4 |