OPERATION
CHANNEL SAVER/MEMORY CHANNELS
OPERATION
MEMORY CHANNELS
28
CHANNEL SAVER FEATURE*
Automatically retains the last channel used when CB is turned off and returns you to that channel when CB is turned back on.
*To function, the “red wire” must be directly connected to either:
1.Positive (+) battery terminal.
2.Connection on the fuse box that is always on. See installation section for details.
NOTE: Leaving the 75 WX ST on after your car is turned off can drain your car battery when connected to a constant 12 volt source.
RETRIEVING CHANNELS FROM MEMORY
1.PRESS and RELEASE the Memory key.
29 |
SAVING CHANNELS IN MEMORY
1.Select desired channel to store in memory.
2.PRESS and RELEASE the Memory key.
3.PRESS and HOLD the desired Memory Location key to lock channel into memory.
4.The Memory Location will appear on
the display.
40
AM
ST
RX
+30 SIG
1 3 5 9
0.5 1 2 | 3 | 4 PWR |
2.PRESS and RELEASE the desired Memory Location key.
3.The channel in the memory location will be recalled.
4.Repeat to recall other Memory Locations.