INSTALLATION
INSTALLATION
MICROPHONE HANGER
10
INSTALLING
MICROPHONE
HANGER
1.Hold microphone hanger in location desired for
mounting. Make certain that nothing will interfere with the hanger’s installation.
2.Mark the location for the three mounting screws (screws included).
3.Drill and mount microphone hanger.
CB ANTENNA INSTALLATION
For the most reliable operation and maximum range, Cobra recommends using a vertically polarized, quarter wave length whip antenna (illustration A).
Shorter,
NOTE: Mobile installations (cars, trucks, boats, etc) should be made only with a
•A standard antenna connector (Type
•Cobra antenna models are recommended; see your local CB dealer or order directly from Cobra. See order form on page 40.
•For maximum efficiency in boat installations, a ground plate is required, unless the vessel has a steel hull. Consult your CB dealer for information regarding an adequate grounding system.
CB ANTENNA
11
A
B