Cobra Electronics 75 WX ST operating instructions Mounting Connector BOX, Connecting Wires

INSTALLATION

CONNECTOR BOX

8

MOUNTING

CONNECTOR BOX

1. Hold Cobra 75 WX ST Connector Box in exact location desired for mounting.

2. Using it as a template, mark the location for the mounting screws (included).

NOTE: Make certain that nothing will interfere with the installation of the mounting screws, before drilling holes.

3. Mount Connector Box as shown.

INSTALLATION

CONNECTOR BOX

9

CONNECTING WIRES

1.Connect the antenna

cable connector.

2.Connect the red wire marked “BATT” (+)

directly to the positive side of the battery or to a connection on the fuse box that is always on.

3.Connect the black wire

marked “Ground” (-) to the negative side of the car, usually the chassis. Any other location with good electrical contact (paint removed) will also work.

CAUTION: Leaving the 75 WX ST on after your car is turned off can drain your car battery when connected to a constant 12 volt source. When connected to accessory 12 volt source unit will turn off.