Midland Radio P25 operation manual Transmitting Digital Individual Calls

Syn-Tech III P25 Portable Radio

OPERATION MANUAL

4.2.4Transmitting Digital Individual Calls

Individual calls are addressed to a single unit ID rather than a talk group. This radio is capable of transmitting both unacknowledged and acknowledged indvidual calls. Most digital radios are capable of receiving unacknowledged individual calls, but some may not be able to respond to an acknowledged individual call.

4.2.4.1Transmitting Unacknowledged Individual Calls

Repeatedly press the

(pound) key until

“INDIVIDUAL:” is displayed. Enter the unit ID or press the left soft key (INDEX) to select from the address book. Press the left soft key (OK) to enter unacknowledged individual call mode.

Then press PTT to initiate an individual call to the selected unit ID.

If no signal is received and PTT is not pressed for ten seconds, individual call mode will time out.

Press # key

until

“Individual:” is displayed

Enter unit

ID or press

INDEX.

Press OK to enter unacknowledged individual call mode

Figure 4.36 – Unacknowledged individual call mode

Individual call initiation may be disabled in radio programming.

680-090-2041	37
Version 5.0	http://www.midlandradio.com