Syn-Tech III P25 Portable Radio
OPERATION MANUAL
4.2.4.2Transmitting Acknowledged Individual Calls
The radio may also initiate an acknowledged individual call. This type of call may not be supported by other radios. To initiate an acknowledged individual call, press INDEX then scroll to the desired unit ID. While the unit ID is displayed, press
the (pound) key.
The radio will send up to four individual call requests. If the receiving radio accepts the call, the initiating radio will enter individual call mode.
Press
INDEX
Use up/down
to scroll to
unit ID, then press # key
If accepted, radio enters individual call mode
Figure 4.37 – Transmitting acknowledged individual call
Individual call initiation may be disabled in radio programming.
38 | |
Version 5.0 | http://www.midlandradio.com |
|