Press # key
until “Call
Alert:” is
displayed
Enter unit ID
or press
INDEX
Press SEND
Syn-Tech III P25 Portable Radio
OPERATION MANUAL
4.2.7Receiving a Digital Call Alert
A call alert is normally used as a low priority request to return the call when it’s more convenient. When a call alert is received the radio will display the unit ID of the initiator.
4.2.8Transmitting a Digital Call Alert
Figure 4.41 – Receiving a call alert
Repeatedly press the (pound) key until “CALL ALERT:” is displayed. Enter
the destination unit ID or press the left soft key for INDEX. Press the left soft key (SEND) to send the call alert. The radio will send up to four call alert requests.
Call alert transmissions may be disabled in radio programming.
If unit ID is does
not answer
Figure 4.42 – Initiating a call alert request
41 | |
Version 5.0 | http://www.midlandradio.com |
|