NorthStar Navigation Northstar NS100 quick start Make a routine call to a group

Page 41

5.The call details are summarized on the LCD screen. Press >ENT to send the call. The radio checks the status of CH70 and if it is busy, waits for two seconds before rechecking.

When CH70 is free, the call is sent and the TX symbol appears on the LCD screen.

6.If the call is acknowledged, press PTT to talk on the working channel.

If there is no reply, try making the call again. (See Reference Section 3 - Retry a routine call.)

Make a routine call to a group

DSC CALL INDIVIDUAL LAST CALL >GROUP

SELECT GROUP		FISHING		FISHING		FISHING
>FISHING		055555555		055555555		055555555
WATERSKIERS		ROUTINE		ROUTINE		ROUTINE
RACING		>SET CHANNEL		ENT>SEND?		CALLING...

1.Press CALL to display the ﬁrst three options of the DSC CALL menu.

2.Move the cursor to GROUP then press >ENT. You can send a call to any one of the groups that you have set up (see Reference Section 2 - Enter a new group MMSID.)

3.Select the group that you want to call and then press >ENT.

4.The group name and MMSID are displayed. Select the working channel and press >ENT. (You cannot usually call a duplex channel so these are automatically eliminated. If the call is to a Coast Station the radio will recognize this and select the correct frequency.)

5.The call details are summarized on the LCD screen. Press >ENT to send the call. The radio checks the status of CH70 and if it is busy, waits for two seconds before rechecking. When CH70 is free, the call is sent and the TX symbol appears on the LCD screen.

6.If the call is acknowledged, press PTT to talk on your selected working channel. If there is no reply, try making the call again. (See Reference Section 3 - Retry a routine call.)

40	Northstar NS100

Image 41

Contents Northstar NS100 FCC Statement Contents International channel banks Getting Started Welcome to the NS100 radio Using this manualTechnical support ConventionsMaintaining the radio Quickstart Guide Turn the radio on and off LCD screen symbolsGPS Enter alphanumeric dataAtis Handset button functions Display and navigate a menu Select the TX power Adjust the volumeAdjust the backlighting Customise your radioSelect a channel Adjust the squelchSelect the channel bank Select a favorite channel Make a callStore 3 favorite channels Dual/Tri watch scan Delete a favorite channelSelect a weather channel Use the foghorn on the NS100DS All scan and channel lock outShadow watch scan Use the hailer on the NS100 DS Use the intercom on the NS100 DSUse the dual handsets on the NS100 DS Handset alarm for the NS100 DSReference Section Radio Menu OptionsNS100 radio menu Buddy List LOCAL/DIST USA/INT/CAN GPS/DATA DSC SetupEdit a buddy’s details Add a new buddySet the radio sensitivity Delete a buddy’s detailsUSA Set your position and time manuallyZones Set the time offsetShow or hide the time Select the time formatShow or hide the boat’s position GPS alert settingPhone AAAA. or Select dual or triple watch modeEdit or delete a channel name Weather alert setting DSC Func Reset to factory defaultsSet the contrast Setup the DSC functions DSC setup menu What is DSC?Special Note Enter your MmsidEnter a new group Mmsid Edit a group Mmsid Select your response to individual calls Delete a group MmsidTurn the DSC functions on/off Select your response to LL polling callsTurn the Atis functions on/off Enter your Atis IDMaking DSC calls DSC call menu Make a routine call to an individual Reply to the last incoming callMake a routine call to a group Call all ships Retry a routine callRequest the LL position of a buddy Call back using the call log dataReference Manual Receiving DSC calls European radio models require Manual acknowledgement Manually acknowledge an individual callReply to a group call Automatically acknowledge an individual callReply to an all ships call Automatically reply to an LL position request Manually reply to an LL position requestReply to a geographic call Do not reply to an LL position requestDistress calls Send a distress call Receive and reply to a distress call Call back using the distress logsReceive a distress relay Receive a distress acknowledgement Appendix a Technical Speciﬁcations NS100 SS NS100 DS Spurious & harmonics Attenuated at least 43+10logPo USA Appendix B Troubleshooting Problem No position information is displayed Appendix C VHF Marine Channel Banks International channel banks Ship Ship Special Notes on International Channel Usage USA channel banks Pleasure Special Notes on USA Channel Usage Canadian channel banks 28B RX Only 162.000 Public Correspondence, RX Only Special Notes on Canada Channel Usage Country-speciﬁc inland waterways Europe AIS1 Special Notes on European International Channel Usage Special Channels