NorthStar Navigation Northstar NS100 quick start Automatically acknowledge an individual call

Page 47

Automatically acknowledge an individual call

PORT OPS/VTS		RCV:INDIV		COMMERCIAL
N 39 27.021’		ROUTINE		N 39 27.021’
E135 12.011’		567856789		E135 12.011’
T 09:34 UTC		ESC->EXIT		T 09:39 UTC

If you have set up your radio to respond to incoming DSC calls automatically (see Reference Section 2 - Select your response to individual calls) the following happens when the radio picks up an incoming call:

1.The radio beeps to alert you to the incoming call. Press any key except >ENT or <ESC to stop the beeps now.

At the same time, the LCD screen displays the TELEPHONE symbol, the type of incoming call, and the MMSID of the caller.

If the radio recognises the MMSID as one of your buddies, it displays the buddy name in place of the MMSID.

The radio also changes to CH70 automatically and displays the TX symbol.

If you press <ESC to ignore the call, or do not respond within three minutes, the radio returns to its previous status.

The details of the incoming call are stored in the call log. If the call log is full, the oldest entry is automatically deleted.

You can also store the MMSID of any entry into your buddy list, if you want. The radio will automatically copy the MMSID but you must enter a name manually.

Reply to a group call

PORT OPS/VTS		RCV:GROUP		FROM		PORT OPS/VTS
N 39 27.021’		URGENCY		034567891		N 39 27.021’
E135 12.011’		RACING		ESC->EXIT		E135 12.011’
T 09:34 UTC						T 09:39 UTC

When the radio picks up an incoming call from any one of the groups that you have set up earlier:

1.The radio beeps to alert you to the incoming call. The type of beep depends upon the type of call. Press any key except >ENT or <ESC to stop the beeps.

46	Northstar NS100

Image 47

Contents Northstar NS100 FCC Statement Contents International channel banks Getting Started Welcome to the NS100 radio Using this manualTechnical support ConventionsMaintaining the radio Quickstart Guide Turn the radio on and off LCD screen symbolsGPS Enter alphanumeric dataAtis Handset button functions Display and navigate a menu Customise your radio Adjust the volumeSelect the TX power Adjust the backlightingSelect a channel Adjust the squelchSelect the channel bank Select a favorite channel Make a callStore 3 favorite channels Dual/Tri watch scan Delete a favorite channelSelect a weather channel Use the foghorn on the NS100DS All scan and channel lock outShadow watch scan Use the hailer on the NS100 DS Use the intercom on the NS100 DSUse the dual handsets on the NS100 DS Handset alarm for the NS100 DSReference Section Radio Menu OptionsNS100 radio menu Buddy List LOCAL/DIST USA/INT/CAN GPS/DATA DSC SetupEdit a buddy’s details Add a new buddySet the radio sensitivity Delete a buddy’s detailsUSA Set your position and time manuallyZones Set the time offsetShow or hide the time Select the time formatShow or hide the boat’s position GPS alert settingPhone AAAA. or Select dual or triple watch modeEdit or delete a channel name Weather alert setting DSC Func Reset to factory defaultsSet the contrast Setup the DSC functions DSC setup menu What is DSC?Special Note Enter your MmsidEnter a new group Mmsid Edit a group Mmsid Select your response to individual calls Delete a group MmsidTurn the DSC functions on/off Select your response to LL polling callsTurn the Atis functions on/off Enter your Atis IDMaking DSC calls DSC call menu Make a routine call to an individual Reply to the last incoming callMake a routine call to a group Call all ships Retry a routine callRequest the LL position of a buddy Call back using the call log dataReference Manual Receiving DSC calls European radio models require Manual acknowledgement Manually acknowledge an individual callReply to a group call Automatically acknowledge an individual callReply to an all ships call Automatically reply to an LL position request Manually reply to an LL position requestReply to a geographic call Do not reply to an LL position requestDistress calls Send a distress call Receive and reply to a distress call Call back using the distress logsReceive a distress relay Receive a distress acknowledgement Appendix a Technical Speciﬁcations NS100 SS NS100 DS Spurious & harmonics Attenuated at least 43+10logPo USA Appendix B Troubleshooting Problem No position information is displayed Appendix C VHF Marine Channel Banks International channel banks Ship Ship Special Notes on International Channel Usage USA channel banks Pleasure Special Notes on USA Channel Usage Canadian channel banks 28B RX Only 162.000 Public Correspondence, RX Only Special Notes on Canada Channel Usage Country-speciﬁc inland waterways Europe AIS1 Special Notes on European International Channel Usage Special Channels