OPERATION
Refer to Controls and Indicators
When you turn on your HH955, it is tuned to channel 16 the frequency for distress, safety and calling.
Setting the Squelch
NOTE
Before setting the squelch rotary switch on your marine radio, you must select a channel that is not in use.
Turn the squelch rotary |
|
|
switch counterclockwise |
|
|
until you hear noise. Then |
|
|
turn the squelch rotary | 0 1 2 | 3 |
switch back clockwise just | ||
| squelch | volume |
until the noise stops. |
|
|
Adjust the 4 position SQUELCH rotary switch
to eliminate background noise and select the signals you wish to receive.
Position 0 (counter clockwise) - squelch off. Position 1 - (weak signals) squelch threshold Position 2 - (medium signals) squelch medium Position 3 - (strong signals) squelch maximum.
Selecting a Channel
To select a channel, press
or
.
scan 16
dual 1/5w
mem lock
One Touch Channel 16
Example: While you are monitoring channel 19, you want to check channel 16.
Select channel 19.
To monitor channel 16, press 16 the channel will change from 19 to 16.
To return to channel 19, press 16 again.
M A R I N E V H F R A D I O
SCAN | TX |
5 W | WX |
INT | TRI |
scan 16
dual 1/5W
mem lock
Dual Watch
When monitoring a channel, press dual . Now the HH955 also watches for activity on channels 16 and the channel selected. DUAL appears on the display.
M A R I N E V H F R A D I O
SCAN | TX |
5 W | WX |
DUAL | TRI |
INT |
scan 16
dual 1/5W
mem lock
7