Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
2. Select the channel you want to store by pressing | or | . |
3.Press 
. M appears and a short tone beep is heard.
4.To remove the channels from Memory, press 
once more. A short tone beep sounds and M disappears.
PRIORITY CHANNEL
The Priority Channel feature allows user to monitor one of 40 channels in the uh078sx , monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
1.Press 
four times. PRI and the priority channel number flashes.
2.Press 
or 
to select the desired priority channel. Channel 10 example is shown.
If OFF is selected then priority channel watch during group scan will be inactive.
3.Press and hold 
to store setting.
DROP-OUT DELAY
While scanning, the uh078sx stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 3 seconds for the return of the signal, otherwise, the radio resumes scanning.
15