Uniden uh078sx manual Busy Channel LOCK-OUT BCL

Page 22

BUSY CHANNEL LOCK-OUT (BCL)

This feature prevents accidental transmission on a busy channel.

This is recommended on channels where DCS/CTCSS is being used. If the channel is "active" and the signal is coming from a non or different DCS/CTCSS code user the BCL feature will prevent you from transmitting.

1.Press five times.

2.Press or to change setting ON/OFF. BCL appears on the display when set to ON.

3. Press and hold

to store setting.

BCL cannot be set on extra receive channels (CH41 to CH100).

20

Image 22

Contents Operating Guide Lithium ION Battery Pack Warning Waterproof JIS7Contents Features IntroductionOptional Accessories Included in Your PackageConnect Charger with AC adaptor Getting StartedAttaching the Antenna Attaching the Battery Pack Attaching the BeltclipCharging the Battery Packs Do not transmit when the uh078sx is in the drop-in chargerBattery Level Display Adjusting the KEY Beeps Power ON/OFFVolume OperationSelecting Channel Roger BeepTransmitting a Call Tone Squelch To Transmit and Receive Using a Repeater Channel Scanning To Operate uh078sx in Duplex ModeExample CH40 becomes active Group Scan GS Mode Programming Scan Channels DROP-OUT DelayPriority Channel Choosing a Priority ChannelReceive Channels Manual ProgrammingCtcss Continuous Tone Coded Squelch System Advanced FeaturesDCS Digitally Coded Squelch To activate VOX To De-activate VOXPower Save Busy Channel LOCK-OUT BCL UHF Channel & Frequencies Ctcss & DCS Code List Controls & Indicators MENU/ENTLCD Display Warranty Uniden UH078SX UHF CB Transceiver Radio