Uniden uh012sx manual Installing the Charge Cradle

Page 16

INSTALLING THE CHARGE CRADLE

1.Plug the AC adaptor into the rear of the charge cradle and into the mains power.

2.Place the UH047SX into the charge cradle. The charge light will come on to indicate the unit is charging.

3.Before operating the UH047SX, charge the battery pack for 16 hours.

Do not charge alkaline or non rechargeable batteries.

(3)

Image 16
Contents Uniden Model uh012sx UHF CB Radio Contents Troubleshooting FeaturesMemory Backup Controls/Connectors Controls and ConnectorsIndicators IndicatorsOptional Accessories Included with your uh012sxOperation Selecting a Channel Using Repeater ChannelsTransmitting Open Scan OS Mode Scanning open scanRecalling the Instant Channel Programming the Instant Priority ChannelContinuous Tone Coded Squelch System Ctcss Simplex Mode Duplex Mode CH No UHF CB Channels & FrequenciesWarranty Uniden uh012sx UHF CB RadioUH047SX-2 Control & Indicators Included in Your PackageTo install the batteries Battery InstallationGetting Started Installing the Charge Cradle LOW Battery Alert Belt ClipTo attach the belt clip To remove the belt clipOperation Selecting a Channel Automatic Squelch Feature MonitorScanning To use monitorOperation with the aid of a Repeater Ctcss & DCS DCSTransmitting a Call Tone VOXTo select a call tone Priority Scan Channel Scan Channel MemoryTo set a priority scan channel To set BCL ON/OFFUHF CB Channels & Frequencies Please follow these guidelines for channel use in AustraliaCtcss & DCS Code List Warranty Uniden UH047SX UHF CB RadioUniden Australia Pty Limited/Uniden New Zealand Limited