Uniden uh012sx Belt Clip, LOW Battery Alert, To attach the belt clip, To remove the belt clip

Page 17

BELT CLIP

To attach the belt clip:

Slide the belt clip until it snaps into place.

To remove the belt clip:

To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released.

LOW BATTERY ALERT

If the battery level becomes low, the battery indicator icon on the display begins flashing. When the batteries in the unit are low, the unit will go into a battery Low mode. The Transmit mode is disabled. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, place the radio on the charge cradle to recharge. Full charge will take up to 16 Hrs.

(4)

Image 17
Contents Uniden Model uh012sx UHF CB Radio Contents Memory Backup FeaturesTroubleshooting Controls and Connectors Controls/ConnectorsIndicators IndicatorsIncluded with your uh012sx Optional AccessoriesOperation Transmitting Using Repeater ChannelsSelecting a Channel Scanning open scan Open Scan OS ModeContinuous Tone Coded Squelch System Ctcss Programming the Instant Priority ChannelRecalling the Instant Channel UHF CB Channels & Frequencies Simplex Mode Duplex Mode CH NoUniden uh012sx UHF CB Radio WarrantyUH047SX-2 Included in Your Package Control & IndicatorsGetting Started Battery InstallationTo install the batteries Installing the Charge Cradle Belt Clip LOW Battery AlertTo attach the belt clip To remove the belt clipOperation Selecting a Channel Monitor Automatic Squelch FeatureScanning To use monitorOperation with the aid of a Repeater DCS Ctcss & DCSTo select a call tone VOXTransmitting a Call Tone Scan Channel Memory Priority Scan ChannelTo set a priority scan channel To set BCL ON/OFFPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Uniden UH047SX UHF CB Radio WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited