Uniden uh012sx manual Operation

Page 18

OPERATION

POWER ON/OFF

1. Press and hold select/ key to turn the radio on. A channel number will appear on the display.

2. Press and hold select/ key to turn the radio off.

VOLUME

1. Press or key to increase or decrease the volume level. ‘VOL’ icon appears on the display while volume is being adjusted.

There are 8 volume levels. Level 0 (No Audio) to Level 7 (Maximum Volume).

ADJUSTING THE KEY BEEPS

Your radio emits a beep each time one of the keys (except for the PTT

button) is pressed.

1. To turn OFF this beep: Press and hold /call key while turning on the radio.

2. To turn ON this beep: Press and hold /call key while turning on the radio.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.

However, Roger Beep will not be heard from the speaker.

1.To turn OFF Roger Beep: Press and hold key while turning on the radio.

2.To turn ON Roger Beep: Press and hold key while turning on the radio.

KEYLOCK ON/OFF

1.Press /call key for 1.5 seconds to enter keylock on mode.

2.Press /call key for 1.5 seconds while in Keylock mode to exit the Keylock mode.

While in Keylock on mode, the UH047SX can still receive and transmit.

(5)

Image 18
Contents Uniden Model uh012sx UHF CB Radio Contents Features TroubleshootingMemory Backup Controls/Connectors Controls and ConnectorsIndicators IndicatorsOptional Accessories Included with your uh012sxOperation Using Repeater Channels Selecting a ChannelTransmitting Open Scan OS Mode Scanning open scanProgramming the Instant Priority Channel Recalling the Instant ChannelContinuous Tone Coded Squelch System Ctcss Simplex Mode Duplex Mode CH No UHF CB Channels & FrequenciesWarranty Uniden uh012sx UHF CB RadioUH047SX-2 Control & Indicators Included in Your PackageBattery Installation To install the batteriesGetting Started Installing the Charge Cradle To attach the belt clip LOW Battery AlertBelt Clip To remove the belt clipOperation Selecting a Channel Scanning Automatic Squelch FeatureMonitor To use monitorOperation with the aid of a Repeater Ctcss & DCS DCSVOX Transmitting a Call ToneTo select a call tone To set a priority scan channel Priority Scan ChannelScan Channel Memory To set BCL ON/OFFUHF CB Channels & Frequencies Please follow these guidelines for channel use in AustraliaCtcss & DCS Code List Warranty Uniden UH047SX UHF CB RadioUniden Australia Pty Limited/Uniden New Zealand Limited