UNIDEN Model uh012sx UHF CB Radio
Operation
Operating the uh012sx in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for | |
repeater use. | |
Press | to switch Duplex On. |
"r" (for repeater) is displayed in place of the 1st digit of the channel number indicator. e.g. 01 : normal channel 1 r1 : duplex channel 1
If Duplex is not required - press again to switch Duplex off. Only channels 01 - 08 are available for Duplex.
Check with your local Retailer for information on available repeaters.
Scanning (open scan)
The uh012sx has a scanning feature that allows you to search for active channels automatically.
Press
and Scanning starts.
A S C Technolo
Advanced Signal Clar
| TX BUSY |
Open Scan (OS) Mode | CTCSS |
|
Allows continuous scanning of all channels in ascending order. If an active channel is found, scanning will stop on that channel.
If the received signal ceases, the unit will wait 3 seconds for the signal to return, otherwise scanning resumes.
To deactivate SCAN, press 
or the PTT button on the microphone.
If SCAN is deactivated while on an active channel, the uh012sx
will stay on that channel. If no channels are active, the uh012sx will reinstate the starting channel.
8