Quick SET-UP Guide

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the indoor station and outdoor remote 3 to 5 apart.

2.Batteries should be out of both units for 10 minutes.

3.Place the batteries into the outdoor remote first then into the indoor station. (All outdoor remotes must be started before the indoor station)

4.DO NOT PRESS ANY BUTTONS FOR 10 MINUTES.

In this time the display and sensor will start to talk to each other and the display will show both the indoor temperature and an outdoor temperature. If the station does not display both temperatures after the 10 minutes please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 10 minutes you can place your sensor outdoors and set your time.