Weather Temperature Station | La Crosse Technology WS-7032U instruction

Battery

Cover

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

A. REMOTE TEMPERATURE SENSOR

1.Remove the battery

cover. Place your thumb over the two air-vent slots on the face of the Remote Temperature Sensor, push down gently and slide the battery cover down and off.

2.Observing the correct

polarity, install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation).

3.Replace the battery cover.

B.WEATHER TEMPERATURE STATION

1.Remove the battery cover. Pull up and out from the slot located in the central position of the battery cover.

2.Observing the

correct polarity, install 2 AAA6