La Crosse Technology WS-7032U instruction manual LOW-BATTERY & Battery Replacement Features

Page 7

batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation).

3.Replace the battery cover.

4.To switch between °F and °C, press the °F/°C button on the back of the unit.

Note: After the batteries have been installed into the Weather Temperature Station the LCD segments should light up. Also within 3 minutes, the Outdoor Temperature should be displayed in the OUTDOOR LCD. If any of this does not occur, remove all batteries and install them again— carefully observing the polarity.

C.LOW-BATTERY & BATTERY REPLACEMENT FEATURES

When the batteries become weak in the Weather Temperature Station, a low battery indicator (shaped as a battery) appears in the LCD screen between the Hour display and the Minute display. When you replace the batteries in the Weather Temperature Station, the LCD screen will continue to display its stored information for 20 seconds. This means that if you can install the new batteries within this 20-second time period you do not need to program the Station again.

7

Image 7
Contents WS-7032U Wireless 433 MHz Miniature Weather Station Table of Contents Additional Equipment Inventory of ContentsQuick SET-UP Guide Do not Press ANY Buttons for 10 MinutesPage Weather Temperature Station LOW-BATTERY & Battery Replacement Features Indoor Temperature FeaturesII. Weather Forecast Weather Icons Weather Tendency Arrows II. Outdoor TemperatureMounting Mounting with Screws II. the Weather Station Mounting with Adhesive TapeWall Mounting TroubleshootingMaintenance and Care Instructions Page Temperature measuring range SpecificationsWarranty Information Page Support@lacrossetechnology.com