La Crosse Technology WT-5360U Viewing Time Alarm, Calendar, Second Display, Troubleshooting

Page 10

c.To disable the alarm for 24 hours, press and release any button other than the “SNOOZE” bar or display direction buttons.

NOTE: The alarm will sound in a 3-step crescendo for 80 seconds if the “SNOOZE” bar is not pressed.

4.VIEWING TIME ALARM

a.To momentarily view the time the alarm is set for, press and hold down the “SNOOZE” bar for 2 seconds, and the alarm time will appear for 2 seconds. The clock will automatically return to normal operations after the 2 seconds.

b.To set the LCD to display alarm time, press the “MODE/MIN” button and toggle through display choices until a time with “AL” appears.

G.CALENDAR

To set the bottom of the LCD to display the day and date press the “MODE/MIN” button and toggle through display choices until the day of the week and the date appear.

H.SECOND DISPLAY

To set the bottom of the LCD to display the seconds, press the “MODE/MIN” button and toggle through the display choices until the seconds appear.

V.MAINTENANCE & CARE

A.Avoid extreme temperatures, vibrations, and shock to prevent damage to the units.

B.Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents— they may mark and damage the displays and casings.

C.Do not submerge in water.

D.Remove all low powered batteries immediately to avoid leakage and damage.

E.Replace with new batteries only--and of recommended size.

F.Opening the casings invalidates the warranty. Do not try to repair the units. Contact La Crosse Technology for Repairs.

VI.

TROUBLESHOOTING

 

 

 

 

Problem:

The Projection is faint

 

 

1)

Change intensity setting

 

Solution:

2)

Use AC adapter

 

3)

Darken surroundings

 

 

 

 

4)

Use fresh batteries (if AC is not used)

 

Problem:

The LCD is faint.

 

Solution:

Replace the batteries.

 

Problem:

“OFL” appears in the indoor temperature LCD.

 

 

1)

Move unit to an area with warmer or cooler surrounding

 

Solution:

temperature.

 

 

2)

Current surrounding temperatures are outside measuring range.

 

Problem:

No reception of WWVB signal.

 

Solution:

1)

It may help reception to face the front of the projection alarm in the

 

 

general direction of Ft. Collins, Colorado.

 

 

 

 

 

 

10

Image 10
Contents Page Features & Operations Table of ContentsProgram Mode Maintenance & CareFeatures of Projection Alarm Clock Inventory of ContentsGlossary of Common Terms Quick SET-UP Guide Battery Installation Programming Sequence III. Program ModeTime Zone Setting Function ButtonsManual Time Setting Year and Date SettingDST Daylight Saving Time Setting 12/24-HOUR Clock SettingIndoor Temperature Display IV. Features & OperationsTime Projection Indoor TemperatureTime Alarm LED BacklightCalendar Viewing Time AlarmTroubleshooting Second DisplaySpecifications for WT-5360 Warranty InformationSupport@lacrossetechnology.com FCC Disclaimer