La Crosse Technology WT-5360U instruction manual Quick SET-UP Guide

Page 4

I. QUICK SET-UP GUIDE

Hint: Use good quality alkaline batteries and avoid rechargeable batteries.

1.We recommend beginning the set-up procedure at night when the WWVB signal is easiest to receive.

2.It is also highly recommended to set the projection alarm in a window or other area free of interference in the area of your home that is closest to Colorado (the source of the WWVB signal).

NOTE: The above steps are not required but can help the projection alarm receive the signal faster.

3.Install the batteries in the projection alarm clock.

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

NOTE: It is important to not press any buttons after inserting batteries as this will interrupt the WWVB search sequence.

In this time the display will show the indoor temperature. If the station does not display the indoor temperature after the 15 minutes please retry the set-up as stated above. After the indoor temperature displays for 15 minutes you may place the projection alarm in your desired location.

To complete the set-up of your temperature station after the 15 minutes have passed, please follow the steps beginning on page 6.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Table of Contents Program ModeFeatures & Operations Maintenance & CareFeatures of Projection Alarm Clock Inventory of ContentsGlossary of Common Terms Quick SET-UP Guide Battery Installation III. Program Mode Time Zone SettingProgramming Sequence Function ButtonsManual Time Setting Year and Date Setting12/24-HOUR Clock Setting Indoor Temperature DisplayDST Daylight Saving Time Setting IV. Features & OperationsIndoor Temperature Time AlarmTime Projection LED BacklightViewing Time Alarm TroubleshootingCalendar Second DisplaySpecifications for WT-5360 Warranty InformationSupport@lacrossetechnology.com FCC Disclaimer
Top Page Image Contents