La Crosse Technology WT-5360U instruction manual Specifications for WT-5360, Warranty Information

Page 11

 

2)

Wait overnight for signal.

 

3)

Be sure the projection alarm is at least 6 feet from any electrical

 

 

devices, i.e. TV sets, computers, or other radio controlled clocks.

 

4)

Remove batteries for five minutes, reinsert and leave the unit alone

 

 

overnight without pressing buttons.

 

5)

If problems persist contact La Crosse Technology.

Problem:

Hour is incorrect (minute is correct).

Solution:

Be sure correct time zone and daylight saving time are selected.

Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.

VII.

SPECIFICATIONS FOR WT-5360

 

 

 

 

 

 

Temperature:

 

 

Measuring range:

 

32°F to 99.9°F(0°C to +49.9°C) with 0.2°F(0.1°C)

 

 

resolution. NOTE: “OFL” will display when

 

 

 

temperature is out of this range.

 

Checking intervals:

 

Every 10 seconds

 

 

 

 

 

Power source:

 

 

AC Adapter (included)

 

Input: 120VAC/60Hz Output: DC 6V/100MA

 

 

 

 

 

Battery type:

 

2 x AA, 1.5V (alkaline recommended) (optional)

 

 

 

 

 

Battery life:

 

Approximately 12 months, depending on projection

 

 

and backlight use

 

 

 

 

Dimensions (L x D x H):

 

 

 

Projection Alarm Clock

 

4.6”L x 3.67”D x 2”H

 

 

(116.7L x 51.3D x 93.1H mm)

 

 

 

 

 

 

 

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd

11

Image 11
Contents Page Maintenance & Care Table of ContentsProgram Mode Features & OperationsGlossary of Common Terms Inventory of ContentsFeatures of Projection Alarm Clock Quick SET-UP Guide Battery Installation Function Buttons III. Program ModeTime Zone Setting Programming SequenceYear and Date Setting Manual Time SettingIV. Features & Operations 12/24-HOUR Clock SettingIndoor Temperature Display DST Daylight Saving Time SettingLED Backlight Indoor TemperatureTime Alarm Time ProjectionSecond Display Viewing Time AlarmTroubleshooting CalendarWarranty Information Specifications for WT-5360Support@lacrossetechnology.com FCC Disclaimer