|
| surrounding temperature. Current surrounding temperatures are |
|
| outside measuring range. |
Problem: | ||
Solution: | 1) | Remove the batteries of both units for ten minutes, then reinsert |
|
| them again. Make sure the batteries are new and fresh. See |
|
| setting- up. |
| 2) | Move the |
|
| the transmitter closer to the |
|
| clock is at a receivable range from the transmitter. |
| 3) | Move the units to another location. Interferences from other |
|
| electrical devices operating on the same signal frequency (433MHz) |
|
| may prevent correct signal transmission and reception. |
Problem: | "OF.L“ appears in the outdoor temperature section of the LCD. | |
Solution: | 1) | Wait until the current surrounding temperature cools down or |
|
| increases. Current temperature is outside of the measuring range of |
|
| the transmitter or has temporary affected battery strength. The |
|
| outdoor temperature will be displayed again once the current |
|
| surrounding temperature is within the range of the transmitter. |
CARE AND MAINTENANCE:
•Avoid placing the units in areas prone to vibration and shock as these may cause damage.
•Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes which reduces the accuracy of readings.
•When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or scouring agents.
•Do not submerge the units into water.
•Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended size.
•Do not make any repairs to the units. Please return it to the original point of purchase. Opening and tampering with the units may invalidate the warranty.
15