LCD Screen and settings:
Indoor
Temperature in °F/°C
Sensor identification No. (shown when more than one sensor is used)
Time
Outdoor Temperature in °F/°C
Outdoor Reception
Signal icon*
*When the signal is successfully received by the Temperature Station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is being done now.
For better distinctness the LCD screen is split into 3 sections displaying the information for time, indoor temperature, and outdoor temperature.
Section 1 - TIME
•Display of time.
Section 2 - INDOOR TEMPERATURE
•Display of indoor temperature
Section 3 - OUTDOOR TEMPERATURE
•Display of the outdoor temperature
Receiver Low battery indicator
13
Transmitter Low battery indicator
14
MANUAL SETTING:
12/24- HOUR TIME DISPLAY SETTING AND TEMPERATURE UNIT (°C/°F) SETTING To display the time in
Flashing
1.In normal display mode, press and hold the SET key for about 3 seconds. The "12h" or "24h" digit will be flashing.
2.Press the + key to set the desired time display mode.
3.Press shortly the SET key to advance to the MANUAL TIME SETTING.
Note:
When the time display is set as
15
MANUAL TIME SETTING
Set the time of Temperature Station by the following steps:
Hours |
|
|
| Minutes |
| ||||
| (flashing) | |||
(flashing) |
| |||
|
| |||
1.The hour digit of the time display will be flashing.
2.Press the + key to adjust the hour (Press and hold to allow fast advancing). Press SET key to confirm and go to the minute setting.
3.The minute digit will be flashing. Press the + key to adjust the minute (Press and hold to allow fast advancing).
4.Press SET key once more to return to normal display.
VIEWING THE MINIMUM AND MAXIMUM RECORDS:
To view the MIN/MAX indoor and outdoor temperature records:
1.Press the MIN/MAX key once to view the minimum indoor and outdoor temperature.
16