La Crosse Technology Wireless Temperature Station Resetting the Minimum and Maximum Records

2.Press the MIN/MAX key once more to view the maximum indoor and outdoor temperature.

3.Press the MIN/MAX key to return to current temperature display.

Minimum icon Maximum icon

When several transmitters are used:

1.Select the desired channel first by pressing the CH key.

2.Press the MIN/MAX key to view the selected MIN/MAX records of selected channel.

17

915 MHz RECEPTION CHECK

The Temperature Station should receive the temperature data within few minutes after set-up. If the temperature data is not being received about 2 minutes after setting up (the display shows “- - -” after consecutive failures in receiving signal for times), please check the following points:

1.The distance of the Temperature Station or transmitter should be at least 5 to 6.5 feet (1.5 to 2 meters) away from any interfering sources such as computer monitors or TV sets.

2.Avoid positioning the Temperature Station onto or in the immediate proximity of metal window frames.

3.Using other electrical products such as headphones or speakers operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception.

4.Neighbours using electrical devices operating on the 915MHz signal frequency can also cause interference.

Note:

When the 915MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Temperature station, as the batteries may spring free from the contacts and force

19

Note: The transmitter number will only be displayed if more than one transmitter is used.

RESETTING THE MINIMUM AND MAXIMUM RECORDS:

To reset the MIN/MAX records:

1.Press the MIN/MAX key once to display the min record.

2.Press and hold the MIN/MAX key again for about 3 seconds to reset all the minimum/ maximum data to the current temperature values.

Note: All indoor and outdoor MIN/MAX records from all transmitters will be reset at the same time.

TEMPERATURE TRANSMITTER:

The outdoor temperature is measured and transmitted to the Temperature Station every 4 seconds approximately.

The range of the Temperature Transmitter may be affected by the temperature. At cold temperatures, the transmitting distance may be decreased. Please bear this in mind when placing the transmitter.

18

a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur.

The transmission range is about 330 feet / 100 m from the transmitter to the Temperature Station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see Setting up).

LOW BATTERY INDICATOR

Low battery indicators are displayed on the LCD when the batteries require changing.

POSITIONING THE TEMPERATURE STATION:

The Temperature Station comes attached with foldout table stand, which provides the option of table standing or wall mounting the unit. Before wall mounting, please check that the outdoor temperature values can be received from the desired locations.

20