La Crosse Technology WS 550 US operating instructions Combi-sensor TX 550 US

-After connecting the plug-in AC adapter, the system will run a short test of all display segments in the display (all segments will be displayed).

-You will then hear a short beep and the version number of the weather station will be displayed.

-Finally, the inside temperature and the humidity as well as the air pressure will be displayed. The corresponding sensors are directly built in the base station.

-Now the external sensors need to be started up.

2.2. Combi-sensor TX 550 US

The combi-sensor is delivered as single parts and needs to be assembled before start-up (for further information please refer to the TX 550 US operating instruc-

tions).

-Remove the wind meter and base of the wind meter (small white cylinder), the combi-sensor and the mounting pipes from the packaging.

-Mount the weather cock according to the following description:

-Put together the pipes of the insertion mast. The sensor-holder is mounted on the

Conical

side below

3.Insert the foot into the pipe and rotate it in such a way that it can be locked in the respective holes in the pipe using the two screws

13