La Crosse Technology WS 550 US operating instructions Operations

Page 18

3.2. Operations

As all important data is displayed simultaneously in the display, operations are ba- sically restricted to selecting other sensors or some other weather data by slightly touching the corresponding display field.

The display is divided into display field and menu row. In the normal mode (device is in the main menu):

MIN MAX

RESET

CFG

 

 

 

are accessible by touching the respective fields of the display for the following functions:

INDOOR:

Switching between temperature and dewpoint display

 

("DEWPOINT")

 

OUTDOOR:

Switching between temperature and dewpoint display

 

("DEWPOINT") and windchill display

HUMIDITY:

No function

 

SENSOR:

Switching between the external sensors:

 

1...8:

Additional sensors not available

 

 

for purchase.

 

No display:

TX 550-US

RAIN:

Switching between total rain quantity since the last reset

 

("total"), current hour ("current 1h"), last hour ("1h"), cur-

 

rent day ("current 24h") and last day ("24h"). (Storage

 

for hour: always at xx:30 hours; storage for day: always at

 

7:30 a. m.)

 

SUNSHINE DURATION: Switch between the sunshine duration of the current day ("h/day") and total sunshine duration since the last reset

 

("h")

TIME/DATE:

No Function

WIND:

Switch the numeric display between wind velocity in

 

km/h, m/s, mph and wind direction in degrees

AIR PRESSURE:

Switch the air pressure display between the pressure

 

measured on site ("absolute") and the pressure scaled

 

down to sea level ("relative")

HISTORY:

Switch the trend display of the last 24 hours between air

 

pressure, inside temperature and outside temperature (of

 

the displayed sensors), also see point 26 on page 7

Weather icon:

No function

18

Image 18 Contents
TouchScreen Wireless Weather Station WS 550 US Contents Proper use, exclusion of warranty Appendix a Menu Overview WS 550 USGeneral aspects and Function Display the inside temperature and humidity Display’s outdoor temperature/humidity from Combi SensorDisplay the rainfall quantity in mm, inch or l/m2 for Display the sunrise and sunset time Moon phase displayPreparatory work Data logging functionQuick overview of the display fields Connecting to the mains Preparing the weather stationPC-connection Installing / MountingInserting batteries Start-up base stationPage Page Page Combi-sensor TX 550 US Page ­ + + -­ Log in/delete external sensors Next Cleaning EnterOperations Next Sensor EnterMarking the populated memory slots Sensor ADD DELNo 9 - Sync Deleting a sensor assignmentOperations Reset Rain MINConfiguration Units menu, Set the display units Latitude Position menu, Set positionNext Position Enter LONGITUDE+TIMEZONE+ Timezone menu, Set time zoneNext Timezone Enter Next Lighting EnterSystem menu, System settings DST IntervallRain CAL Enter Altitude EnterAltitude Rain CALCleaningwait CLEANING, menu, Cleaning modeCleaningstart SUN CAL EnterLive Mode menu, call up the current weather data flow Next Live Mode EnterMIN MAX Reset REQ CFG Other Functions and Displays Memory Almost Full Sensor Status Display Changing the batteriesBase station Frost warningPlease follow the battery disposal regulations TroubleshootingWireless sensors No reception transmitter batteries are emptyOther instructions for start-up or troubleshooting Inaccurate rainInstructions for Maintenance and Care RangeCleaning the rain quantity sensor MountSetting the rain sensor Technical Specifications Instructions for disposalPC connection Software Installation Firmware UpdateAppendix Proper use, Exclusion of warranty, Safety instructions Daylight saving time switchingWireless technology BidCoS FCC Information DoC StatementAppendix a Menu Overview WS 550 US Main menu Appendix B Table of latitude/longitude of US counties Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page AST Warranty Information La Crosse Technology