Sensor Status Display
-In the outdoor sensor display field ("Outdoor") there is a small reception indicator to indicate the sensor status:
· Reception indicator is displayed | → Sensor data is being received |
| constantly |
· Reception indicator is blinking | → Sensor data is not being |
| received since the last 40 min. |
· Reception indicator is missing | → Sensor does not exist, |
| permanently out of order or defect |
Warning against turbulent weather
-When a low pressure area is suddenly formed, there is a warning symbol in the display field of the weather forecast. This is an indicator of an upcoming storm or thunderstorm.
Frost warning
-A snow-flake symbol is displayed in the weather forecast field if the temperature measured at the combi-sensor falls below 39.2 °F (4 ˚C).
4.Changing the batteries
Base station
When the battery empty symbol appears in the INDOOR display area (
), then all batteries are to be replaced according to the instructions in section 2.1 with those of the same type.
Always change all the 4 batteries and use only high-quality alkaline batteries. Leave the AC adapter connected when you are changing the batteries so as to avoid data loss.
This Display Unit is designed to run on a/c power. Due to the power requirements of the Display Unit, it ist not recommended to use batteries only for more than a few hours. It ist possible to lose connection with the Combi Sensor if using bat- teries only.
Please note!
The data memory is deleted if you do not connect the AC adapter while re- placing the batteries.
TouchScreen Wireless Weather Station WS 550 US
Contents
Appendix a Menu Overview WS 550 US
Proper use, exclusion of warranty
General aspects and Function
Display’s outdoor temperature/humidity from Combi Sensor
Display the inside temperature and humidity
Display the rainfall quantity in mm, inch or l/m2 for
Data logging function
Moon phase display
Preparatory work
Display the sunrise and sunset time
Quick overview of the display fields
Preparing the weather station
Connecting to the mains
Start-up base station
Installing / Mounting
Inserting batteries
PC-connection
Page
Page
Page
Combi-sensor TX 550 US
Page
+ + -
Next Sensor Enter
Next Cleaning Enter
Operations
Log in/delete external sensors
Deleting a sensor assignment
Sensor ADD DEL
No 9 - Sync
Marking the populated memory slots
Operations
MIN
Reset Rain
Configuration
Units menu, Set the display units
LONGITUDE+
Position menu, Set position
Next Position Enter
Latitude
Next Lighting Enter
Timezone menu, Set time zone
Next Timezone Enter
TIMEZONE+
System menu, System settings
Intervall
DST
Rain CAL
Altitude Enter
Altitude
Rain CAL Enter
SUN CAL Enter
CLEANING, menu, Cleaning mode
Cleaningstart
Cleaningwait
Next Live Mode Enter
Live Mode menu, call up the current weather data flow
MIN MAX Reset REQ CFG
Other Functions and Displays
Memory Almost Full
Frost warning
Changing the batteries
Base station
Sensor Status Display
No reception transmitter batteries are empty
Troubleshooting
Wireless sensors
Please follow the battery disposal regulations
Inaccurate rain
Other instructions for start-up or troubleshooting
Range
Instructions for Maintenance and Care
Mount
Cleaning the rain quantity sensor
Setting the rain sensor
Instructions for disposal
Technical Specifications
Firmware Update
PC connection Software Installation
Appendix
Daylight saving time switching
Proper use, Exclusion of warranty, Safety instructions
Wireless technology BidCoS
DoC Statement
FCC Information
Appendix a Menu Overview WS 550 US Main menu
Appendix B Table of latitude/longitude of US counties
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
AST
Warranty Information
La Crosse Technology