La Crosse Technology WS 550 US operating instructions System menu, System settings

Page 24

BRIGHT CTRL

ON

 

 

-Touch the "ON" field to switch between "Automatic Brightness Control" being active (ON) or deactive (OFF).

-Touch the "BRIGHT CTRL" field, the display is:

BEGIN

+04.00 PM-

 

 

-Touch the "+" or "-" fields to set the switching-on time of the lighting (permanent lighting).

-Touch the "BEGIN" field, the display is:

END

+11.45 PM-

 

 

-Touch the "+" or "-" fields to set the switching-off time of the lighting (permanent lighting).

-Wait for a few seconds, the device switches back to the normal mode and the data that has just been set gets activated.

3.3.7. "SYSTEM" menu, System settings

In this menu you can do the settings for automatic daylight saving time switching (DST, also see Appendix), for activating the beep (BEEP), for data recording interval of the data logger (INTERVALL), for location altitude (ALTITUDE) and for compar- ing the rain sensor (RAIN CAL) and for comparing the brightness threshold for the sunshine duration (SUN CAL).

Activate/deactivate Beep

-Select the "SYSTEM" menu:

NEXT

SYSTEM

ENTER

 

 

 

-Touch the "ENTER" field, the display is:

BEEP

ON

 

 

- Touch the "ON" field to switch between "Beep" being activated (ON) or deacti- vated (OFF).

24

Image 24 Contents
TouchScreen Wireless Weather Station WS 550 US Contents Proper use, exclusion of warranty Appendix a Menu Overview WS 550 USGeneral aspects and Function Display the inside temperature and humidity Display’s outdoor temperature/humidity from Combi SensorDisplay the rainfall quantity in mm, inch or l/m2 for Moon phase display Preparatory workDisplay the sunrise and sunset time Data logging functionQuick overview of the display fields Connecting to the mains Preparing the weather stationInstalling / Mounting Inserting batteriesPC-connection Start-up base stationPage Page Page Combi-sensor TX 550 US Page ­ + + -­ Next Cleaning Enter OperationsLog in/delete external sensors Next Sensor EnterSensor ADD DEL No 9 - SyncMarking the populated memory slots Deleting a sensor assignmentOperations Reset Rain MIN Configuration Units menu, Set the display units Position menu, Set position Next Position EnterLatitude LONGITUDE+Timezone menu, Set time zone Next Timezone EnterTIMEZONE+ Next Lighting EnterSystem menu, System settings DST IntervallAltitude Enter AltitudeRain CAL Enter Rain CALCLEANING, menu, Cleaning mode CleaningstartCleaningwait SUN CAL EnterLive Mode menu, call up the current weather data flow Next Live Mode EnterMIN MAX Reset REQ CFG Other Functions and Displays Memory Almost Full Changing the batteries Base stationSensor Status Display Frost warningTroubleshooting Wireless sensorsPlease follow the battery disposal regulations No reception transmitter batteries are emptyOther instructions for start-up or troubleshooting Inaccurate rainInstructions for Maintenance and Care RangeCleaning the rain quantity sensor MountSetting the rain sensor Technical Specifications Instructions for disposalPC connection Software Installation Firmware UpdateAppendix Proper use, Exclusion of warranty, Safety instructions Daylight saving time switchingWireless technology BidCoS FCC Information DoC StatementAppendix a Menu Overview WS 550 US Main menu Appendix B Table of latitude/longitude of US counties Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page AST Warranty Information La Crosse Technology