La Crosse Technology WS-7014U manual

1.Press the OUT button once. “MIN” appears in the upper- center location of the flashing OUTDOOR LCD, indicating that the minimum temperature, and the time and date of occurrence are displayed. The minimum records will display for 20 seconds.

2.Press the OUT button again (once while “MIN” is still displayed, twice otherwise). “MAX” appears in the upper- center location of the flashing OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed.

3.While “MAX” is still displayed press the OUT button again to return to the current data display. Or you can wait 20 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings.

C.RESETTING THE MIMIMUM AND MAXIMUM RECORDS

1.All the Indoor records (minimum and maximum) will be reset after the IN button is pressed and held for 5 seconds.

2.All the Outdoor records (minimum and maximum) will be reset after the OUT button is pressed and held for 5 seconds.

V.ADDING OUTDOOR REMOTE CONTROL SENDERS (OPTIONAL)

The WS-7014U is able to receive signals from 3 different Remote Control Senders. The Remote Control Sender model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set- up of Remote Control Sender units with the WS-7014U. These extra sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. A TX6U will monitor temperature only, a TX3U will monitor temperature and display the temperature on its LCD, and the TX3UP will monitor the temperature via a probe for use in pools, spas, etc.