La Crosse Technology WS-7014U instruction manual Weather Station

Page 5

DETAILED SET-UP GUIDE

I. BATTERY INSTALLATION

A. REMOTE CONTROL SENDER

1.

Remove the mounting bracket. The

 

 

bracket snaps on and off easily.

Battery

2.

Remove the battery cover, by sliding the

Cover

cover down.

3.Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free).

4.Replace the battery cover by sliding upwards. Be sure battery cover is on securely.

B. WEATHER STATION

1.Remove the battery cover. To do this, insert a solid object in the space provided at the lower-central position of the battery cover, then push up and pull out on the battery cover.

2.Observe the correct polarity, and install 2 AA batteries.

3.Replace the battery cover.

Battery Cover

Note: Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) will flash, and a tone will sound. Within a few seconds the indoor temperature, indoor relative humidity, and the weather icons (sun and clouds) will be displayed. If not, remove batteries for 10 seconds and reinstall. If the outdoor temperature is not displayed within four minutes, remove batteries from both units, wait 10 seconds, and reinstall making sure to install batteries into the sensor first. The time will show -:-- and start searching for the signal. If it successfully receives the time signal (usually at night), it will display the

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents WS-7014U Wireless 433 MHz Radio-controlled Weather Station Topic Inventory of Contents Do not Press ANY Buttons for 10 Minutes Quick SET-UP GuideWeather Station Page II or 24 Hour Time Setting Program ModeIII. Time Zone Setting Function KeysIV. Daylight Saving Time DST Setting Time Manual Time SettingVI. Setting the DAY, DATE, and Year Date LCD VIII. Setting the LCD ContrastVII. Selecting F or C Weather Forecast Features of the WS-7014UWeather Icons Forecast LCDWeather Tendency Arrows IV. Minimum and Maximum Temperature Records III. Outdoor TemperatureViewing the Indoor Temperature Records Viewing the Outdoor Temperature RecordsAdding Outdoor Remote Control Senders Optional Resetting the Mimimum and Maximum RecordsSET-UP of Multiple Units Mounting with Screws Mounting Remote Control SenderUsing the Table Stand II. the Indoor Temperature StationMounting with Adhesive Tape Wall MountingPage Troubleshooting Maintenance and Care Instructions Temperature measuring range SpecificationsWarranty Information Support@lacrossetechnology.com
Top Page Image Contents