La Crosse Technology WS-1510-IT Reset the Maximum and Minimum Weather Data, Total rainfall amount

Page 7

2. Max outdoor temperature with the date and time of recording

3. Min dew point temperature with the date and time of MIN icon

recording

Time and date of recording

MIN dew point value

MIN icon

4.Max dew point temperature with the date and time of recording

5.Min outdoor humidity with the date and time of recording

6.Max outdoor humidity with the date and time of recording

Time and date of recording

MAX outdoor humidity value

MAX icon

25

Time and date of recording

MAX wind speed value

MAX icon

12.Maximum Gust with the date and time of recording

Time and date of recording

MAX wind gust value

MAX icon

13.Max 24 hour rainfall with the date and time of recording

27

7.Min Wind chill temperature with the date and time of recording

Time and date of recording

MIN wind chill value

MIN icon

8.Max Wind chill temperature with the date and time of recording

9.Min Relative pressure with the date and time of recording

10.Max Relative pressure with the date and time of recording

Time and date or recording

MAX relative pressure value

MAX icon

11.Maximum wind speed with the date and time of recording

26

24h rainfall value

MAX icon

RESET THE MAXIMUM AND MINIMUM WEATHER DATA

To reset the aforementioned maximum or minimum weather data 1. to 13., you shall need to reset each of the data independently.

1.Press MIN/MAX key to show the desired weather data. For instance, if you want to reset the minimum humidity, in the normal display you shall press the MIN/MAX key three times to show the min humidity value.

2.Press and hold the SET key for about 2 seconds, then the "RESET" icon will appear at the bottom part of the LCD.

3.Press the + key once, then the stored value will be reset to the current value and current time.

4.Press the ALARM key to return to normal display mode.

14.Total rainfall amount

The total rainfall measurement is displayed in the fourth section of the LCD, in the unit of mm or inch. It shows the total rainfall accumulated since last reset of the weather station.

In normal display mode, press the MIN/MAX key fourteen times to show the total rainfall value. The "RESET" icon will also be shown at the same time.

28

Image 7
Contents Features Table of ContentsSetting UP Function Keys Battery Change12/24 Hour Time Display Setting Manual SettingLCD Contrast Setting Manual Time SettingRelative AIR Pressure Unit Setting Temperature Unit SettingWind Speed Unit Setting Rainfall Unit SettingHysteresis High and LOW Outdoor Temperature Alarm SettingWind Speed Alarm Setting High and LOW Outdoor Humidity Alarm SettingWind Direction and Wind Speed Measurement Weather Tendency IndicatorRainfall Measurement Viewing the History DataTotal rainfall amount Reset the Maximum and Minimum Weather DataMaximum Gust with the date and time of recording Maximum wind speed with the date and time of recordingSwitching ON/OFF the Buzzer LOW Battery IndicatorPositioning LA Crosse Technology Sensor Extension Cable Care and MaintenanceSpecifications Warranty InformationProper Restart Quick Set-up Guide FAQ WS-1510-ITProgram Set Up Menu Mounting SensorsOutdoor Temperature/Humidity is Inaccurate 12/24-HOUR Time ModeIndoor Temperature Readings Display Indoor Temperature is BlankReset Total Rainfall Turning off the Time AlarmStorm Alarm Reset the Min/Max dataDisplay Information Entire Display is Blank Power Source Battery LeakageForecast Icons Forecast Icon Shows Incorrect Conditions Forecast Icon is Blinking