La Crosse Technology WA-1030U owner manual Four SET modes are Set Mode 1 Set LCD Contrast

Page 21

Version 1.7 - 9/25/2008

The Four SET modes are:

Set Mode 1 – Set LCD Contrast (1-8)

ƒPress and Hold the “SET” Key until the Wireless Display beeps to enter the SET mode

ƒ“CONTRST” and number (1-8) will display on the bottom of the LCD

ƒPress the “VOLUME +” Key to update the LCD Contrast settings.

Lightest Contrast = “1”, Darkest Contrast = “8”

ƒPress the “SET” Key to save the current settings and advance to the next option

ƒPress the “SET” Key to save the current settings and advance to the next option

Set Mode 2 - Set Text Scrolling Speed (1-3)

ƒPress the “SET” Key until “Scr” flashes at the top and “SET SCROLL SPEED” scrolls across the bottom

ƒThe standard speed is set to “2”

ƒThere are four speeds available – “1” is the slowest and “4” is the fastest

ƒPress the “VOLUME +” Key to change the scroll speed.

ƒPress the “SET” Key to save the current settings and advance to the next option

Set Mode 3 – Factory Reset of Wireless Display

NOTE: It is not possible to re-register a previously registered Wireless Display under a new account until the Wireless Display has been deleted from the user account on www.weatherdirect.com and a Factory Reset has been performed.

NOTE: Expansion Options that are Lifetime Upgrades are still active on your Wireless Display even if you delete it from your user account on www.weatherdirect.com or perform a Factory Reset. The selection of locations and other custom settings will need to be performed again if the Wireless Display is re-registered.

WARNING: The Factory Reset procedure will erase any registration and setup information from your Wireless Display. You must register the Wireless Display again with www.weatherdirect.com to use it after a Factory Reset.

Page 21 of 31

Image 21
Contents WA-1030U Day Talking Weather Forecaster Table of Contents When ADD 4 Locations Expansion Option is Active Congratulations Quality ForecastsWeather Direct is Green Included in the Box MHz Wireless Sensor TechnologyWhat You Need to Get Started Alkaline batteries for the Wireless DisplayHardware Installation Set Up your WA-1030UWireless Outdoor Sensor Installation Options Gateway InstallationTo Surface Mount the Outdoor Sensor To Wall Mount the Outdoor SensorOnline Resources Time Setting on Wireless Display FeaturesEdit Device Settings Online Wireless Outdoor SensorPage Version 1.7 9/25/2008 Wireless Display Operation SET Mode SECTION+ Mode KeySnooze Key Alarm KeyChange the Volume of Audio Playback Volume + KeyChange a Setting While Using the SET Modes Listen to a Severe Weather AlertC Keys Custom Audio Feeds Forecast KeyHear the Talking Weather Forecast Set a Custom Greeting to Hear Before the ForecastChanging Settings on Your Wireless Display When ADD 4 Locations Expansion Option is ActiveSET Key Hear the Audio Feed Assigned to the A, B or C KeyFour SET modes are Set Mode 1 Set LCD Contrast Free Trial of Expansion Options for 14 Days To Perform the Factory ResetFour Additional Forecast Locations Severe Weather AlertsWatches Types of Severe Weather AlertsForecast Icons Explained Battery Low Icons Care and MaintenanceBattery Replacement Troubleshooting SpecificationsPower Requirements Liability Disclaimer FCC Statements Warranty Information Version 1.7 9/25/2008