7.Press and release the “SET” button to confirm the minutes and to advance to the Day, Date, and Year setting mode.
Note: In 12h mode, “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours, nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception at optimal times.
VII. SETTING THE DAY, DATE, AND YEAR
1.Press and hold the “SET” button for 3 seconds, or until “12 h” or “24 h” flashes in the DATE LCD.
2.Press and release the “SET” button 5 more times to reach the Weekday setting mode.
Note: “MO” (representing Monday) is the default setting for the weekday, “1.1” is the default setting for the numeric month and day, and “1999” is the default setting for the year. The day, date, and year will be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash respectively in the DATE LCD during manual programming.
3.The weekday will be flashing in the
DATE LCD, press and release the “CH” button to change the weekday.
4.Press and release the “SET” button
to confirm, and to enter the numeric- month setting mode.
5. The
6.Press and release the “SET” button to confirm the
7.The
press and release the “CH” button to select the current day.
8. Press and release the “SET” button to confirm and to enter the year setting mode.
9.The
10.Press and release the “SET” button to confirm and to advance to the °F or °C setting mode.
10