Troubleshooting

Problem: No reception of WWVB time signal.

Solution: 1) Wait overnight for signal.

2)Be sure indoor weather station is at least 6 feet from any electrical devices such as televisions, computers or other radio-controlled clocks.

3)Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons.

4)If there are still problems, contact La Crosse Technology.

Problem: Hour is incorrect (minute and date are correct).

Solution: Be sure correct time zone and daylight saving time is selected.

Problem: The LCD is faint

Solution: 1) Set the LCD contrast to a higher number 2) Replace batteries

Problem: No outdoor temperature is displayed.

Solution: 1) Remove all batteries, reinsert into remote temperature sensor first, then into the indoor temperature station.

2)Place remote temperature sensor closer to the indoor temperature station.

3)Be sure all batteries are fresh.

NOTE: For problems not solved, please contact La Crosse Technology.

MAINTENANCE AND CARE INSTRUCTIONS

Extreme temperatures, vibration and shock should be avoided to prevent damage to the units.

Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents. They may mark the displays and casings.

Do not submerge in water.

Immediately remove all low powered batteries to avoid leakage and damage.

Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.