La Crosse Technology WS-9210U IV. Time Zone Setting, Daylight Saving Time DST Setting

2.Press and release the “CH” button to toggle between 12 and 24-hour time.

3.Press and release the “SET” button to confirm the 12/24-hour setting and to advance to Time Zone Setting.

IV. TIME ZONE SETTING

The default time zone is EST, “Zo -5” (Eastern
Standard Time), to change this setting:
1.	Press and hold the “SET” button for 3
	seconds or until “12 h” OR “24 h” flashes
	in the DATE LCD.
2.	Press and release the “SET” button 1 more time to enter the Time
	Zone setting mode.
3.	The default Time Zone “Zo-5” will flash in the DATE LCD.
4.	Select your appropriate time	Time Zones
	zone using the “CH” button.
	During selection of the Time		GMT	0
	Zone, the 3 letter		Atlantic	-4
	abbreviations for the time
		EST;	Eastern	-5
	zones found in North
	America will flash across the	CST;	Central	-6
	top of the TIME LCD.	MST;	Mountain	-7
	Observe the chart below,
		PST;	Pacific	-8
	showing the corresponding
		ALA;	Alaska	-9
	abbreviations, time zones,
5.	and codes.	HAW;	Hawaii	-10
	Press and release the “SET”

button to confirm and advance to the Daylight Saving Time setting.

V. DAYLIGHT SAVING TIME (DST) SETTING

1. Press and hold the “SET” button for 3 seconds or until “12 h” or “24 h” flashes in the DATE LCD.

2. Press and release the “SET” button 2 more times to reach the DST selection mode.

3.“DST 1” is the default setting and will be flashing in the DATE LCD.

4.Press and release the “CH” button to select “DST 0” or “DST 1.”

5.“DST 0” indicates that the feature is off and the WWVB will not change times automatically. “DST 1” indicates that the feature is on and the WWVB will change times automatically.

8