Philips AZT9240 manual Alarm activation/deactivation

Page 21

ALARM CLOCK

English

Alarm activation/deactivation

At the set alarm time either the tuner will start playing for 1 hour, the beeper will come on for 3 minutes or an entire CD will be played.

IMPORTANT!

To ensure your selected beeper, CD or tuner alarm activates at the set time, make sure you leave the CD player in standby mode.

1Keep SET· pressed for approximately 2 seconds, then briefly press SET· twice.

y Either ALbEEP, ALCd or ALtun is displayed.

2Press 3 or 4 if necessary repeatedly within

5 seconds to select the desired alarm signal until the display shows either:

ALbEEP: the beeper will be the alarm signal,

ALCd: the CD will be the alarm signal, or

ALtun: the tuner will be the alarm signal.

yAt the set time starts flashing and the

selected alarm signal will come on.

• You can deactivate the beeper for 24 hours by pressing any key on the player.

•If you deactivate the alarm function by switching CD or tuner play off with 9, CD or tuner play will restart after 24 hours.

•To switch the alarm function on or off,

keep ESP pressed for approximately 2 seconds. y is shown if the alarm function is on.

Notes: – If there is no CD inserted or no radio station tuned, the beeper will be taken as the alarm signal instead.

–If the alarm is activated during CD or tuner playback, playback is interrupted and you will hear the beeper alarm through the LINE OUT/p connection only, irrespective of your chosen alarm signal.

–In standby mode, the beeper alarm uses the built-in speaker located on the base of the CD player.

24

Page 20 Page 22
Image 21
Page 20 Page 22
Contents AZT9240 ESP Locks all buttons CONTROLS, refer to the illustration onQuick Start Battery indication Power SupplyBattery type ESP on ESP off Batteries supplied or optionally availableRechargeable ECO-PLUS NiMH battery handling Rechargeable ECO-PLUS NiMH batteries AY 3362 onlyRecharging the ECO-PLUS NiMH batteries on board Environmental information Power SUPPLY/HEADPHONESMains adapter supplied or optionally available Belt Clip not on all versionsHeadphones HE 545 or HL Use your head when using headphonesCD player and CD handling Playing a CD CD PlayTime are displayed You can pause playback by pressingVolume adjustment Volume and bassBass adjustment Playback informationSelecting a track when playback is stopped FeaturesSelecting a track and searching Selecting a track during playbackClearing the program Programming track numbersWhere you have stopped Storing the last position played ResumeResume is shown Press 9 whenever you want to stop playback Locking all buttons Hold ESP Playback starts in the chosen mode after 2 seconds Selecting different playing possibilities ModeTuning to radio stations manually Tuning to radio stations automaticallyRadio Radio playAntennas Tuning to a stored radio stationStoring radio stations You can store up to 30 radio stationsClock Time settingAlarm Clock Alarm time settingIs shown and the alarm time is displayed for 5 seconds Alarm activation/deactivation In-car use connections supplied or optionally available IN-CAR ConnectionPut the CD player on a Player is neither a dangerProblem Possible cause Solution TroubleshootingTime settings Alarm doesNo sound or Not work
Related manuals
Manual 24 pages 18 Kb
Top Page Image Contents