Philips AZT9240 manual Troubleshooting, Problem Possible cause Solution

TROUBLESHOOTING

English

WARNING

Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.

Problem	Possible cause	Solution
No power,	Batteries
playback does	Batteries inserted incorrectly	Insert the batteries
not start		correctly.
	Batteries are empty.	Change the batteries.
	Contact pins are dirty.	Clean them with a cloth.
	Mains adapter
	Loose connection	Connect the adapter
		securely.
	In-car use
	Cigarette lighter is not powered	Switch on ignition or insert
	when ignition is off.	batteries.
nF dISC	CD-RW (CD-R) is not recorded	Use FINALIZE on the
indication	properly.	CD recorder to complete
		the recording.
no dISC	The CD is badly	Replace or clean the CD.
indication	scratched or dirty.
	CD is not or incorrectly inserted.	Insert a CD, label upwards.
	The laser lens is steamed up.	Wait until the lens has
		cleared.
HoLd indication	HOLD is activated.	Deactivate HOLD.
and/or no reaction
	Electrostatic discharge	Disconnect the set from
to controls		power supply or take out
		the batteries for
		a few seconds.
The CD skips tracks. The CD is damaged or dirty.		Replace or clean the CD.
	RESUME, SHUFFLE or PROGRAM is	Switch RESUME, SHUFFLE
	active.	or PROGRAM off.

26