Philips AZT9240 Power SUPPLY/HEADPHONES, Environmental information, Belt Clip not on all versions

Page 7

POWER SUPPLY/HEADPHONES

Mains adapter (supplied or optionally available)

English

Use only the AYT 3170 adapter (4.5 V/300 mA direct current, positive pole to the centre pin). Any other product may damage the player.

1 Make sure that the local voltage corresponds to the mains adapter´s voltage.

2Connect the mains adapter to the 4.5V DC socket of the player and to the wall socket.

4.5V DC

Note: Always disconnect the adapter when you are not using it.

Belt Clip (not on all versions)

1 To attach the belt clip to the CD-player, position the
shaped grip (found on the back of the belt clip) so that	BELT CLIP
it fits into the belt clip hole of the CD-player.

2Turn the clip to LOCK as indicated on the set.

3To detach, gently lift the belt clip and turn

to RELEASE as indicated on the set.	LOCK
	LIFT
	RELEASE

Environmental information

•All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet).

•Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

10

Image 7

Contents AZT9240 ESP Locks all buttons CONTROLS, refer to the illustration onQuick Start Batteries supplied or optionally available Power SupplyBattery indication Battery type ESP on ESP offRechargeable ECO-PLUS NiMH batteries AY 3362 only Rechargeable ECO-PLUS NiMH battery handlingRecharging the ECO-PLUS NiMH batteries on board Belt Clip not on all versions Power SUPPLY/HEADPHONESEnvironmental information Mains adapter supplied or optionally availableUse your head when using headphones Headphones HE 545 or HLCD player and CD handling You can pause playback by pressing CD PlayPlaying a CD Time are displayedPlayback information Volume and bassVolume adjustment Bass adjustmentSelecting a track during playback FeaturesSelecting a track when playback is stopped Selecting a track and searchingClearing the program Programming track numbersStoring the last position played Resume Where you have stoppedResume is shown Press 9 whenever you want to stop playback Locking all buttons Hold ESP Playback starts in the chosen mode after 2 seconds Selecting different playing possibilities ModeRadio play Tuning to radio stations automaticallyTuning to radio stations manually RadioYou can store up to 30 radio stations Tuning to a stored radio stationAntennas Storing radio stationsClock Time settingAlarm time setting Alarm ClockIs shown and the alarm time is displayed for 5 seconds Alarm activation/deactivation Player is neither a danger IN-CAR ConnectionIn-car use connections supplied or optionally available Put the CD player on aProblem Possible cause Solution TroubleshootingNot work Alarm doesTime settings No sound or

Related manuals

Manual 24 pages 18 Kb