Philips AZT9240 Power Supply, Batteries supplied or optionally available, Inserting batteries

Page 5

POWER SUPPLY

English

Batteries (supplied or optionally available)

With this player you can use either:

normal batteries type LR6, UM3 or AA (preferably Philips), or

alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes: – Old and new or different types of batteries should not be used in combination.

Remove batteries if they are empty or if the player is not going to be used for a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either

2 normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol A flashes,

bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

 

 

Battery type

ESP on

ESP off

Normal

7

hours

6

hours

 

 

 

 

 

Alkaline

 

22

hours

19

hours

 

 

 

 

 

 

ECO-PLUS NiMH batteries (not on all versions)

10

hours

9

hours

Batteries contain chemical substances, so they should be disposed of properly.

8

Image 5
Contents AZT9240 ESP Locks all buttons CONTROLS, refer to the illustration onQuick Start Battery indication Power SupplyBattery type ESP on ESP off Batteries supplied or optionally availableRecharging the ECO-PLUS NiMH batteries on board Rechargeable ECO-PLUS NiMH battery handlingRechargeable ECO-PLUS NiMH batteries AY 3362 only Environmental information Power SUPPLY/HEADPHONESMains adapter supplied or optionally available Belt Clip not on all versionsCD player and CD handling Headphones HE 545 or HLUse your head when using headphones Playing a CD CD PlayTime are displayed You can pause playback by pressingVolume adjustment Volume and bassBass adjustment Playback informationSelecting a track when playback is stopped FeaturesSelecting a track and searching Selecting a track during playbackClearing the program Programming track numbersResume is shown Press 9 whenever you want to stop playback Where you have stoppedStoring the last position played Resume Locking all buttons Hold ESP Playback starts in the chosen mode after 2 seconds Selecting different playing possibilities ModeTuning to radio stations manually Tuning to radio stations automaticallyRadio Radio playAntennas Tuning to a stored radio stationStoring radio stations You can store up to 30 radio stationsClock Time settingIs shown and the alarm time is displayed for 5 seconds Alarm ClockAlarm time setting Alarm activation/deactivation In-car use connections supplied or optionally available IN-CAR ConnectionPut the CD player on a Player is neither a dangerProblem Possible cause Solution TroubleshootingTime settings Alarm doesNo sound or Not work
Related manuals
Manual 24 pages 18 Kb