Program

4. Repeat steps 2 and 3 to program other tracks till you finish (up to 22 selections).

N O T E : Do this quickly to avoid the set from shutting itself off.

5.After programming is finished, press Play to begin programmed play. “PROGRAM ” stops flashing and music begins (the Display still shows “PROGRAM ” ).

X 1

N O T E :

• During programming, the word “ PROGRAM ” will flash in the display. To program songs to play in your prefered order, follow steps below:

1.Press the Program Button 2 times during play. Program # 2 will now show in the display, ready

The word “ PROGRAM ” and the track number for your next selection of track. will flash in the Display.

P R O G R A M

X 2

PROGRAMMING YOUR PLAYING SEQUENCE PROGRAMMED PLAY

•The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 22 tracks can be programmed).

Programming			Example:
										etc.
Program Number	1	2		3	4	5	6	7	8	etc.

Track Number (song number)	3	5		8	1	2	4	1	1	etc.

P R O G R A M

2.Press the Skip/Search Button ( or ) to select track number 3 (example).

P R O G R A M

TUNING +

3.Press the Repeat/Enter Button. Track 3 is now programmed.

X 1

The player stops automatically after all programmed tracks have been played.

The programmed tracks are stored in memory until the CD Door is opened (please remember to use the Stop Button before opening the CD Door), or after power is shut off.

Your program memory will be lost:

•When the alkaline batteries are exhausted or removed or the AC Adaptor is disconnected.

•When the power is shut off.