FORWARD AND REWIND TRACK SEARCH (or changing songs)
Press the Search Button ( 
or 
) during play to go to the desired track (song).
Search FORWARD |
| SEARCH |
Search BACKWARD |
|
|
• Press the Forward Search ( | ) Button to skip to the next track | TUNING + |
on the disc. |
|
|
•Press the Backward Search (
) Button to rewind to the beginning of the track currently
playing. Press this button twice or more to skip to previous tracks.
Press and hold the Search Button ( 
or 
) during play to scan the disc at higher speed. When the desired music section of the disc is found, release the button, normal play will resume.
•If you press and hold the Search Button ( the track is reached, the player stops.
) while the last track is playing, and the end of
BASS BOOST SWITCH
This switch enhances the low frequency (bass) sounds at low listening levels. Slide this Switch ON or OFF to suit your taste. During bass boost ON setting, sometimes, you may hear some distortion, adjust the Volume Control to a lower level for the best sound quality.
AUTO POWER OFF FUNCTION
The power turns off automatically when all tracks on a disc have been played or the Stop Button is pressed. The display will show track and time for 30 seconds and then shut itself off.
The power turns off immediately when the CD Door is opened (please remember to press the Stop Button before opening the CD Door).
IF BUTTONS DO NOT WORK
If operating buttons do not work when pressed:
1.Remove the batteries or AC Adaptor and wait a few seconds. The circuits will reset themselves. 2.Replace the batteries or AC Adaptor.
3.If the buttons still do not work, your batteries are weak, replace them or use the AC Adaptor.
REMEMBER
•If the symbol “ 
” flashes in the display, your batteries are weak, replace them or use the AC Adaptor.
•If the Display is blank - no numbers show when the Play/Pause Button is pushed, the batteries are dead. Replace them, or use the AC Adaptor (also check if you inserted the batteries according to the + and - as shown on the back of the set).
8