Panasonic BTT268 Network Easy Setting, Reprogramming the remote control, Firmware updates

Network Easy Setting

The configuration of your network is about to begin. If you failed to make the settings, refer to “When you experience problems with settings”.

When you experience problems with settings

Network Easy Setting (Home Network Connection Check)

Network Easy Setting (Home Network Connection Check)

Complete.
1.	LAN cable connection	: Fail
2.	IP address setting	: Fail
3.	Connection to gateway	: Fail

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network connection again. Select “No” and press [OK] to finish Network Easy Setting.

≥Refer to the operating instructions of the hub or router.

≥You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. ( 34)

≥ You can redo these settings individually using “Network Settings”. ( 34)

≥Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

Reprogramming the remote control

If you have more than one Panasonic player/recorder and the remote control operates both products at once, you will need to change the remote control code on one product to prevent this occurrence. ( 34, “Remote Control Code”)

Getting started

Yes	No
OK

	Display		Check the
			following
1.	LAN cable connection	:Fail	≥ Connection of
2.	IP address setting	:Fail	the LAN
3.	Connection to gateway	:Fail	cables ( 15)
1.	LAN cable connection	:Pass	≥ Connection
2.	IP address setting	:Fail	and settings of
3.	Connection to gateway	:Fail	the hub and
			router
1.	LAN cable connection	:Pass
			≥ Settings of “IP
2.	IP address setting	:Pass
			Address /
3.	Connection to gateway	:Fail	DNS Settings”
			( 34)

Network Easy Setting (Internet Connection Check)

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the owner's manual for the cause of the error and the solution for it.

Press [OK].

OK

Display	Check the following
Cannot find the server.	≥ “Primary DNS” and “Secondary
(Error code: B019)	DNS” Settings of “IP Address /
	DNS Settings” ( 34)
Failed to connect to the	≥ The server may be busy or the
server.	service may have been
(Error code: B020)	suspended. Please wait a few
	moments, and then try again.
	≥ Settings of “Proxy Server
	Settings” ( 34) and the router.

Firmware updates

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following message is displayed.

New firmware is available.

Please update firmware in Setup.

To update the firmware

Press [HOME] select “Others” [OK] [OK] (“Setup”)

select “Others” [OK]	select “Firmware Update”
[OK] select “Update Now”	[OK]

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware was updated.

Current Version: x.xx

OK

RETURN

≥If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/ (This site is in English only.)

To show the firmware version on this unit. ( 34, “System Information”)

≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥If you do not want to check for the latest firmware version, set “Automatic

Update Check” to “Off”. ( 34)

VQT3M40

17