Speaker settings
Delay time
For optimum listening with
If either distance A or B is less than C, find the difference in the relevant table and adjust the delay time to make up for the difference.
A |
| : B |
C |
| |
L C | R | : C |
A | C | |
|
| |
| SW |
|
| B | D |
LS | RS | |
LS | RS |
|
A B C: Primary listening distance A Approximate room dimensions B Actual speaker position
C Ideal speaker position
D Circle of constant primary listening distance
1 Press [3, 4, 2, 1] to select the distance box (ms0.0 ) and press [OK].
e.g., 5.1ch setting
| L | ms | C | dB | R |
| 0.0 | 0 | |||
|
|
|
|
|
| Complete |
| dB |
| Test |
| 0 |
|
| SW | |
| dB | ms | dB |
0 | 0.0 | 0 | |
| LS |
| RS |
ACenter (C)
BLeft Surround (LS), Right Surround (RS)
2 Press [3, 4] to select the setting and press [OK].
ACenter speaker
Difference | Setting |
Approx. 34 cm (1 ft. 1 in.) | 1.0 ms |
Approx. 68 cm (2 ft. 2 in.) | 2.0 ms |
Approx. 102 cm (3 ft. 4 in.) | 3.0 ms |
Approx. 136 cm (4 ft. 5 in.) | 4.0 ms |
Approx. 170 cm (5 ft. 6 in.) | 5.0 ms |
Adjusting speaker level
Volume (Channel balance) ( | dB | ) |
0 |
(Effective when playing
1 Select “Test” and press [OK].
A test signal is output.
2 While listening to the test signal
Press [3, 4] to adjust the volume of each speaker.
The volume can be adjusted between r6 dB to s6 dB.
≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.
3 Press [OK].
The test signal stops.
e.g., 5.1ch setting
|
|
| |
|
L | ms | C | dB | R |
0.0 | 0 | |||
Complete |
| dB |
|
| Test |
| 0 |
| SW | ||
| dB | ms | dB |
0 | 0.0 | 0 | |
| LS |
| RS |
ACenter (C) B Test
C Left Surround (LS), Right Surround (RS)
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
Advanced operations
B Surround speaker
Difference | Setting |
Approx. 170 cm (5 ft. 6 in.) | 5.0 ms |
Approx. 340 cm (11 ft. 1 in.) | 10.0 ms |
Approx. 510 cm (16 ft. 8 in.) | 15.0 ms |
VQT3M40
35