5. Once end cap is properly seated tighten the screw as shown above.
6. Thighten bottom end cap screw.
7. Replace the grille, ensure it’s seated properly on the unit.
Ensure seam is tight.
WLCA/WLHA HIGH WALL EVAPORATOR Installation Instructions
Reassembling the WLCA/WLHA cabinet
When satisfied that the system is leak free reinstall the bottom and left end cap in the precise order shown below:
1. Replace the bottom panal.
2. Fasten the right end cap side first with the
3.Next replace and tighten the re- maining screws across the bot- tom panel.
4. Replace left left end cap.
8. Tighten the top scew on the left end cap.
WLCA/WLHA High Wall Evaporator | 14 | www.enviromaster.com |